Users Manual

https://www.peplink.com 109 Copyright @ 2021 Peplink
Connection
Priority
This option allows you to configure the WAN connection whether for normal daily usage or
as a backup connection only.
If Always-on is chosen, the WAN connection will be kept on continuously, regardless of the
priority of other WAN connections.
If Backup is chosen, the WAN connection will depend on other WAN connections. It will not
be used when one or more higher priority dependent WAN connections are connected.
Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection, and will
be used when none of the other higher priority connections are available.
Reply to ICMP
PING
If the checkbox is unticked, this option is disabled and the system will not reply to any ICMP
ping echo requests to the WAN IP addresses of this WAN connection.
Default: ticked (Yes)
Upload
Bandwidth
This field refers to the maximum upload speed.
This value is referenced when default weight is chosen for outbound traffic and traffic
prioritization. A correct value can result in effective traffic prioritization and efficient use of
upstream bandwidth.
Download
Bandwidth
This field refers to the maximum download speed.
Default weight control for outbound traffic will be adjusted according to this value.