User's Manual

https://www.peplink.com 22 Copyright @ 2021 Peplink
4.10
NetFlow 
NetFlow protocol is used to track network traffic. Tracking information from NetFlow can be sent to the
NetFlow collector, which analyzes data and generates reports for review.
Note: To enable this feature, go to https://<Device's IP>/cgi-bin/MANGA/support.cgi
4.11 Wi-Fi Air Monitoring
Peplink routers support Wi-Fi “Air Monitoring Mode” which is used to troubleshoot remotely and proactively
monitor Wi-Fi and WAN performance. After enabling Wi-Fi Air Monitoring, reports can be viewed under
InControl 2 > Reports > AirProbe Reports.
Note: To enable this feature, go to https://<Device's IP>/cgi-bin/MANGA/support.cgi
4.12 SP Default Configuration
The SP Default Configuration feature written in the updated KB article allows for the provisioning of
custom made settings (a.k.a. InControl2 configuration) via the Ethernet LAN port and is ideal for those
wanting to do a bulk deployment of many Peplink devices.
Note: If you would like to use this feature, please contact your purchase point (Eg.VAD).