User's Manual
https://www.peplink.com 86 Copyright @ 2021 Peplink
11
BasicConfiguration
11.1
ConnectingtotheWebAdminInterface
Start a web browser on a computer that is connected with the Peplink Balance through the LAN.
To connect to the web admin of the Peplink Balance, enter the following LAN IP address in the address
field of the web browser:
https://192.168.1.1
(This is the default LAN IP address of the Peplink
Balance.) Enter the following to access the web
admin interface.
Username: admin
Password: admin
(This is the default admin user login of the Peplink
Balance. )
You must change the default password on the first successful logon.
Password requirements are: A minimum of 10 lower AND upper case characters, including at least 1
number.
When HTTP is selected, the URL will be redirected to HTTPS by default.
After successful login, the Dashboard of the web admin interface will be displayed.
Important Note
The Save button causes the changes to be saved. Configuration changes (e.g., WAN, LAN, admin settings, etc.)
take effect after clicking the Apply Changes button on each page’s top-right corner.