Users Manual
https://www.peplink.com 326 Copyright @ 2021 Peplink
Afte
r the fields have been entered as in the screenshot, click Save to add the rule. Afterwards, change the
default inbound rule to Deny by clicking the default rule in the Inbound Firewall Rules table. Click Apply
Changes on the top right corner to complete the process.
OutboundAccessRestriction
Scenario
For security reasons, it may be appropriate to restrict outbound access. For example, you may want to
prevent LAN users from using ftp to transfer files to and from the Internet. This can easily be achieved by
setting up an outbound firewall rule with the Peplink Balance.
Solution
To setup a firewall between the Internet and private network for outbound access, navigate to
Network>Firewall>Access Rules. Click the Add Rule button in the Outbound Firewall Rules table, and
then adjust settings according the screenshot: