Users Manual

https://www.peplink.com 237 Copyright @ 2021 Peplink
Multicast Rate
A
This setting specifies the transmit rate to be used for sending multicast network traffic.
The selected Protocol and Channel Bonding settings will affect the rate options and
values available here.
IGMP Snooping
A
To allow the Pepwave router to listen to internet group management protocol (IGMP)
network traffic, select this option.
DHCP Relay
Put the address of the DHCP server in this field..
DHCP requests will be relayed to this DHCP server
DHCP Option 82
A
If you use a distributed DHCP server/relay environment, you can enable this option to
provide additional information on the manner in which clients are physically connected
to the network.
Layer 2 Isolation
A
Layer 2 refers to the second layer in the ISO Open System Interconnect model.
When this option is enabled, clients on the same VLAN, SSID, or subnet are isolated
to that VLAN, SSID, or subnet, which can enhance security. Traffic is passed to upper
communication layer(s). By default, the setting is disabled.
Maximum Number
of Clients
Indicate the maximum number of clients that should be able to connect to each
frequency.
Band Steering
To reduce 2.4 GHz band overcrowding, AP with band steering steers clients capable
of 5 GHz operation to 5 GHz frequency.
Choose between:
Force - Clients capable of 5 GHz operation are only offered with 5 GHz frequency.
Prefer - Clients capable of 5 GHz operation are encouraged to associate with 5 GHz
frequency. If the clients insist to attempt on 2.4 GHz frequency, 2.4 GHz frequency will
be offered.
Disable - Default
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Security Settings
Security
Policy
This setting configures the wireless authentication and encryption methods. Available
options:
● Open (No Encryption)
● WPA3 -Personal (AES:CCMP)
● WPA2/WPA3 -Personal (AES:CCMP)