Users Manual

https://www.peplink.com 238 Copyright @ 2021 Peplink
● WPA2 -Personal (AES:CCMP)
● WPA2 – Enterprise
● WPA/WPA2 - Personal (TKIP/AES: CCMP)
● WPA/WPA2 – Enterprise
When WPA/WPA2 - Enterprise is configured, RADIUS-based 802.1 x authentication is
enabled. Under this configuration, the Shared Key option should be disabled. When using this
method, select the appropriate version using the V1/V2 controls. The security level of this
method is known to be very high.
When WPA/WPA2- Personal is configured, a shared key is used for data encryption and
authentication. When using this configuration, the Shared Key option should be enabled. Key
length must be between eight and 63 characters (inclusive). The security level of this method
is known to be high.
NOTE:
When WPA2/WPA3- Personal is configured, if a managed AP which is NOT WPA3 PSK
capable, the AP Controller will not push those WPA3 and WPA2/WPA3 SSID to that AP.
Access Control
Restricted
Mode
The settings allow the administrator to control access using MAC address filtering. Available
options are None, Deny all except listed, and Accept all except listed
MAC Address
List
Connections coming from the MAC addresses in this list will be either denied or accepted based
on the option selected in the previous field.
If more than one MAC address needs to be entered, you can use a carriage return to separate
them.