Users Manual

https://www.peplink.com 262 Copyright @ 2021 Peplink
SMTP Server
This setting specifies the SMTP server to be used for sending email. If the server requires
authentication, check Require authentication.
Connection
Security
This setting specifies via a drop-down menu one of the following valid Connection Security:
● None
● STARTTLS
● SSL/TLS
SMTP Port
This field is for specifying the SMTP port number. By default, this is set to 25. If Connection
Security is selected “STARTTLS”, the default port number will be set to 587. If Connection
Security is selected “SSL/TLS”, the default port number will be set to 465.
You may customize the port number by editing this field.
SMTP User
Name /
Password
This setting specifies the SMTP username and password while sending email. These options
are shown only if Require authentication is checked in the SMTP Server setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
Sender’s Email
Address
This setting specifies the email address which the Peplink Balance will use to send its reports.
Recipient’s
Email Address
This setting specifies the email address(es) to which the Peplink Balance will send email
notifications. For multiple recipients, separate each email using the enter key.
After you have finished setting up email notifications, you can click the Test Email Notification button to
test the settings before saving. After Test Email Notification is clicked, you will see this screen to confirm
the settings:
Click Send Test Notification to confirm. In a few seconds, you will see a message with detailed test results.