Users Manual

https://www.peplink.com 269 Copyright @ 2021 Peplink
15.1.10 Configuration 
Backing up Peplink Balance settings immediately after successful completion of initial setup is strongly
recommended. The functionality to download and upload Peplink Balance settings is found at
System>Configuration.
Configuration
Restore
Configuration to
Factory Settings
The Restore Factory Settings button is to reset the configuration to factory default
settings. After clicking the button, you will need to click the Apply Changes button on
the top right corner to make the settings effective.
Download Active
Configurations
Click Download to backup the current active settings.
Upload
Configurations
To restore or change settings based on a configuration file, click Choose File to locate
the configuration file on the local computer, and then click Upload. The new settings can
then be applied by clicking the Apply Changes button on the page header, or you can
cancel the procedure by pressing discard on the main page of the web admin interface.
Upload
Configurations
from High
Availability Pair
In a high availability (HA) configuration, the Balance unit can quickly load the
configuration of its HA counterpart. To do so, click the Upload button. After loading the
settings, configure the LAN IP address of the Peplink Balance unit so that it is different
from the HA counterpart.