Users Manual

https://www.peplink.com 277 Copyright @ 2021 Peplink
15.3 CLI(CommandLine)Support 
The serial console connector on some Peplink Balance units is RJ-45. To access the serial console port,
prepare a RJ-45 to DB-9 console cable. Connect the RJ-45 end to the unit's console port and the DB-9 end
to a terminal's serial port. The port setting will be 115200,8N1.
The serial console connector on other Peplink Balance units is a DB-9 male connector. To access the serial
console port, connect a null modem cable with a DB-9 connector on both ends to a terminal with the port
setting of 115200,8N1.