Users Manual

https://www.peplink.com 287 Copyright @ 2021 Peplink
The connection information shows the details of the selected PepVPN profile, consisting of the Profile
name, Router ID, Router Name and Serial Number of the remote router
Advanced features for the PepVPN profile will also be shown when the More Information checkbox is
selected.
The WAN statistics show information about the local and remote WAN connections (when show Remote
connections) is selected.
The available details are WAN Name, IP address and port used for the Speedfusion connection. Rx and
Tx rates, Loss rate and Latency.
Connections can be temporarily disabled by sliding the switch button next to a WAN connection to the left.
The wan-to-wan connection disabled by the switch is temporary and will be re-enabled after 15 minutes
without any action.
This can be used when testing the PepVPN speed between two locations to see if there is interference or
network congestion between certain WAN connections.