User's Manual

https://www.peplink.com 111 Copyright @ 2019 Pepwave
19 OSPF & RIPv2
The Pepwave supports OSPF and RIPv2 dynamic routing protocols.
Click the Advanced tab from the top bar, and then click the Routing Protocols >OSPF & RIPv2
item on the sidebar to reach the following menu:
OSPF
Router ID
This field determines the ID of the router. By default, this is specified as the LAN
IP address. If you want to specify your own ID, enter it in the Custom field.
Area
This is an overview of the OSPFv2 areas you have defined. Click on the area
name to configure it. To set a new area, click Add. To delete an existing area,
click .