User's Manual

https://www.peplink.com 115 Copyright @ 2019 Pepwave
Autonomous
System
Neighbor's ASN
Multihop/TTL
Time-to-live (TTL) of BGP packet.
Leave it blank if BGP neighbor is directly connected, otherwise you must specify a
TTL value. Accurately, this option should be used if the configured neighbor IP
address does not match the selected Interface's network subnets. TTL value must
be between 2 to 255.
Password
Optional password for MD5 authentication of BGP sessions.
AS-Path
Prepending:
AS path to be prepended to the routes received from this neighbor.
The value must be a comma separated ASN.
For example "64530,64531" will prepend "64530, 64531" to received routes.
Hold Time
Time in seconds to wait for a keepalive message from the neighbor before
considering the BGP connection is staled.
This value must be either 0 (infinite hold time) or between 3 and 65535 inclusively.
Network
Advertising
Networks to be advertised to BGP neighbor.
Static Route
Advertising
Enable this option to advertise LAN static routes. Static routes that match the
Excluded Networks table will not be advertised.
Advertise OSPF
Route
When this box is checked, all learnt OSPF routes will be advertised.