User's Manual

https://www.peplink.com 116 Copyright @ 2019 Pepwave
Filter Mode
This option selects the route import filter mode.
None: all BGP routes will be accepted.
Accept: Routes in "Restricted Networks" will be accepted, routes not in the list will
be rejected.
Reject: Routes in "Restricted Networks" will be rejected, routes not in the list will
be accepted.
Restricted
Networks
This specifies the network in the “route import” entry
Exact Match: When this box is checked, only routes with the same Networks and
Subnet Mask will be filtered.
Otherwise, routes within the Networks and Subnet will be filtered.
Export to other
BGP Profile
When this box is checked, routes learnt from this BGP profile will export to other
BGP profiles.
Export to OSPF
When this box is checked, routes learnt from this BGP profile will export to the
OSPF routing protocol.
21 Remote User Access
a Networks routed by a Peplink Balance can be remotely accessed via L2TP with IPsec or PPTP.
To configure this feature, navigate to Network > Remote User Access