User's Manual

https://www.peplink.com 128 Copyright @ 2019 Pepwave
have an FTP server listening on a port number other than 21, you can check
Define custom control ports and enter the port numbers in the text boxes.
TFTP
The Pepwave router monitors outgoing TFTP connections and routes any
incoming TFTP data packets back to the client. Select Enable if you want to
enable TFTP passthrough support.
IPsec NAT-T
This field is for enabling the support of IPsec NAT-T passthrough. UDP ports
500, 4500, and 10000 are monitored by default. You may add more custom
data ports that your IPsec system uses by checking Define custom ports. If
the VPN contains IPsec site-to-site VPN traffic, check Route IPsec Site-to-Site
VPN and choose the WAN connection to route the traffic to.
21.6 GPS Forwarding
Using the GPS forwarding feature, some Pepwave routers can automatically send GPS reports
to a specified server. To set up GPS forwarding, navigate to Advanced>GPS Forwarding.
GPS Forwarding
Enable
Check this box to turn on GPS forwarding.
Server
Enter the name/IP address of the server that will receive GPS data. Also specify
a port number, protocol (UDP or TCP), and a report interval of between 1 and
10 seconds. Click to save these settings.
GPS Report Format
Choose from NMEA or TAIP format for sending GPS reports.
NMEA Sentence
If you’ve chosen to send GPS reports in NMEA format, select one or more