User's Manual

https://www.peplink.com 131 Copyright @ 2019 Pepwave
SSID Settings
SSID
This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi
clients.
Enable
Click the drop-down menu to apply a time schedule to this interface
VLAN ID
This setting specifies the VLAN ID to be tagged on all outgoing packets
generated from this wireless network (i.e., packets that travel from the Wi-Fi
segment through the Pepwave AP One unit to the Ethernet segment via the
LAN port). The default value of this setting is 0, which means VLAN tagging
is disabled (instead of tagged with zero).
Broadcast SSID
This setting specifies whether or not Wi-Fi clients can scan the SSID of this
wireless network. Broadcast SSID is enabled by default.