User's Manual

https://www.peplink.com 132 Copyright @ 2019 Pepwave
Data Rate
A
Select Auto to allow the Pepwave router to set the data rate automatically,
or select Fixed and choose a rate from the displayed drop-down menu.
Multicast Filter
A
This setting enables the filtering of multicast network traffic to the wireless
SSID.
Multicast Rate
A
This setting specifies the transmit rate to be used for sending multicast
network traffic. The selected Protocol and Channel Bonding settings will
affect the rate options and values available here.
IGMP Snooping
A
To allow the Pepwave router to listen to internet group management protocol
(IGMP) network traffic, select this option.
DHCP Option 82
A
If you use a distributed DHCP server/relay environment, you can enable this
option to provide additional information on the manner in which clients are
physically connected to the network.
Network Priority
(QoS)
A
Select from Gold, Silver, and Bronze to control the QoS priority of this
wireless network’s traffic.
Layer 2 Isolation
A
Layer 2 refers to the second layer in the ISO Open System Interconnect
model.
When this option is enabled, clients on the same VLAN, SSID, or subnet are
isolated to that VLAN, SSID, or subnet, which can enhance security. Traffic
is passed to upper communication layer(s). By default, the setting is
disabled.
Maximum Number of
Clients
Indicate the maximum number of clients that should be able to connect to
each frequency.
Band Steering
A
Band steering allows the Pepwave router to steer AP clients from the
2.4GHz band to the 5GHz band for better usage of bandwidth. To make
steering mandatory, select Enforce. To cause the Pepwave router to
preferentially choose steering, select Prefer. The default for this setting is
Disable.
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Security Settings