User's Manual

https://www.peplink.com 133 Copyright @ 2019 Pepwave
Security Policy
This setting configures the wireless authentication and encryption methods.
Available options are Open (No Encryption), WPA/WPA2 - Personal,
WPA/WPA2 – Enterprise and Static WEP.
Access Control
Restricted
Mode
The settings allow administrator to control access using MAC address filtering.
Available options are None, Deny all except listed, Accept all except listed, and
RADIUS MAC Authentication.
When WPA/WPA2 - Enterprise is configured, RADIUS-based 802.1 x
authentication is enabled. Under this configuration, the Shared Key option should
be disabled. When using this method, select the appropriate version using the V1/V2
controls. The security level of this method is known to be very high.
When WPA/WPA2- Personal is configured, a shared key is used for data
encryption and authentication. When using this configuration, the Shared Key
option should be enabled. Key length must be between eight and 63 characters
(inclusive). The security level of this method is known to be high.
The configuration of Static WEP parameters enables pre-shared WEP key
encryption. Authentication is not supported by this method. The security level of this
method is known to be weak.
MAC Address
List
Connection coming from the MAC addresses in this list will be either denied or
accepted based the option selected in the previous field.