User's Manual

https://www.peplink.com 164 Copyright @ 2019 Pepwave
Configuration
Restore
Configuration to
Factory Settings
The Restore Factory Settings button is to reset the configuration to factory
default settings. After clicking the button, you will need to click the Apply
Changes button on the top right corner to make the settings effective.
Download Active
Configurations
Click Download to backup the current active settings.
Upload
Configurations
To restore or change settings based on a configuration file, click Choose File to
locate the configuration file on the local computer, and then click Upload. The new
settings can then be applied by clicking the Apply Changes button on the page
header, or you can cancel the procedure by pressing discard on the main page of
the web admin interface.
Upload
Configurations
from High
Availability Pair
In a high availability (HA) configuration, a Pepwave router can quickly load the
configuration of its HA counterpart. To do so, click the Upload button. After
loading the settings, configure the LAN IP address of the Pepwave router so that it
is different from the HA counterpart.
25.10 Feature Add-ons
Some Pepwave routers have features that can be activated upon purchase. Once the purchase
is complete, you will receive an activation key. Enter the key in the Activation Key field, click
Activate, and then click Apply Changes.
25.11 Reboot
This page provides a reboot button for restarting the system. For maximum reliability, the
Pepwave router can equip with two copies of firmware. Each copy can be a different version.
You can select the firmware version you would like to reboot the device with. The firmware