User's Manual

https://www.peplink.com 27 Copyright @ 2019 Pepwave
Drop-in Mode Settings
Enable
Drop-in mode eases the installation of Peplink routers on a live network between
the existing firewall and router, such that no configuration changes are required
on existing equipment. Check the box to enable the drop-in mode feature, if
available on your model.
WAN for Drop-In
Mode
Select the WAN port to be used for drop-in mode. If WAN 1 with LAN Bypass is
selected, the high availability feature will be disabled automatically.
Share Drop-In IP
A
When this option is enabled, the passthrough IP address will be used to connect
to WAN hosts (email notification, remote syslog, etc.). The Pepwave router will
listen for this IP address when WAN hosts access services provided by the
Pepwave router (web admin access from the WAN, DNS server requests, etc.).
To connect to hosts on the LAN (email notification, remote syslog, etc.), the
default gateway address will be used. The Pepwave router will listen for this IP
address when LAN hosts access services provided by the Pepwave router (web
admin access from the WAN, DNS proxy, etc.).
Shared IP
Address
A
Access to this IP address will be passed through to the LAN port if this device is
not serving the service being accessed. The shared IP address will be used in
connecting to hosts on the WAN (email notification, remote syslog, etc.) The
device will also listen on the IP address when hosts on the WAN access services
served on this device (web admin access from the WAN, DNS server, etc.)
WAN Default
Gateway
Enter the WAN router's IP address in this field. If there are more hosts in addition
to the router on the WAN segment, check the I have other host(s) on WAN
segment box and enter the IP address of the hosts that need to access LAN
devices or be accessed by others.
WAN DNS Servers
Enter the selected WAN's corresponding DNS server IP addresses.
A
-
Advanced feature, please click the button on the top right-hand corner to activate.