User's Manual

https://www.peplink.com 33 Copyright @ 2019 Pepwave
To add a new LAN, click the New LAN button. To change LAN settings, click the name of the
LAN to change under the LAN heading.
The following settings are displayed when creating a new LAN or editing an existing LAN.
IP Settings
IP Address &
Subnet Mask
Enter the Pepwave router’s IP address and subnet mask values to be used on
the LAN.
Network Settings
Name
Enter a name for the LAN.
VLAN ID
Enter a number for your VLAN.
Inter-VLAN
routing
Check this box to enable routing between virtual LANs.