User's Manual

https://www.peplink.com 34 Copyright @ 2019 Pepwave
Captive Portal
Check this box to turn on captive portals.
DHCP Server Settings
DHCP Server
When this setting is enabled, the Pepwave router’s DHCP server automatically
assigns an IP address to each computer that is connected via LAN and configured
to obtain an IP address via DHCP. The Pepwave router’s DHCP server can
prevent IP address collisions on the LAN.
To enable DHCP bridge relay, please click the icon on this menu item.
IP Range &
Subnet Mask
These settings allocate a range of IP address that will be assigned to LAN
computers by the Pepwave router’s DHCP server.
Lease Time
This setting specifies the length of time throughout which an IP address of a DHCP
client remains valid. Upon expiration of Lease Time, the assigned IP address will
no longer be valid and the IP address assignment must be renewed.
DNS Servers
This option allows you to input the DNS server addresses to be offered to DHCP
clients. If Assign DNS server automatically is selected, the Pepwave router’s
built-in DNS server address (i.e., LAN IP address) will be offered.
WINS Servers
This option allows you to specify the Windows Internet Name Service (WINS)
server. You may choose to use the built-in WINS server or external WINS servers.
When this unit is connected using SpeedFusion
TM
, other VPN peers can share this
unit's built-in WINS server by entering this unit's LAN IP address in their DHCP
WINS Servers setting. Therefore, all PC clients in the VPN can resolve the
NetBIOS names of other clients in remote peers. If you have enabled this option, a
list of WINS clients will be displayed at Status>WINS Clients.