User's Manual

https://www.peplink.com 40 Copyright @ 2019 Pepwave
9.1 Ethernet WAN
Health Check Settings
Health Check
Method
This field specifies the Health Check method to be used for this WAN connection.
● Disabled - The WAN connection is always considered to be up and will not
be treated as down for any IP routing errors.
● PING - ICMP PING packets will be issued to test connectivity with
configurable target IP addresses or host names.
● DNS Lookup - DNS lookups will be issued to test the connectivity with
configurable target DNS server IP addresses.
● HTTP - HTTP connections will be issued to test the connectivity with
configurable URLs and strings to match.
Default: DNS Lookup
PING Hosts
These fields are for specifying the target IP addresses or host names where ICMP
Ping packets will be sent to for health check.
If the box Use first two DNS servers as PING Hosts is checked, the first two DNS
servers will be the ping targets for checking the connection healthiness. If the box
is not checked, the field Host 1 must be filled and the field Host 2 is optional.
The connection is considered to be up if ping responses are received from any one
of the ping hosts.
Timeout
If a health check test cannot be completed within the specified amount of time, the
test will be treated as failed.