User's Manual

https://www.peplink.com 41 Copyright @ 2019 Pepwave
Health Check
Interval
This is the time interval between each health check test.
Health Check
Retries
This is the number of consecutive check failures before treating a connection as
down.
Recovery
Retries
This is the number of responses required after a health check failure before treating
a connection as up again.
Bandwidth Allowance Monitor Settings
Bandwidth
Allowance
Monitor
Check the box Enable to enable bandwidth usage monitoring on this WAN
connection for each billing cycle. When this option is not enabled, bandwidth usage
of each month is still being tracked but no action will be taken.
Action
If Email Notification is enabled, you will receive an email notification when usage
hits 75% and 95% of the monthly allowance.
If the box Disconnect when usage hits 100% of monthly allowance is checked, this
WAN connection will be disconnected automatically when the usage hits the
monthly allowance. It will not resume unless this option has been turned off or the
usage has been reset when a new billing cycle starts.
Start Day
This option allows you to select which day of the month a billing cycle starts.
Monthly
Allowance
This field is to specify the bandwidth allowance for each billing cycle.