User's Manual

https://www.peplink.com 43 Copyright @ 2019 Pepwave
DHCP Connection Settings
Routing Mode
NAT allows substituting the real address in a packet with a mapped
address that is routable on the destination network. By clicking the help
icon in this field, you can display the IP Forwarding option, if your
network requires it.
IP Address/ Subnet
Mask/ Default
Gateway
This information is obtained from the ISP automatically.
Hostname
(Optional)
If your service provider's DHCP server requires you to supply a hostname
value upon acquiring an IP address, you may enter the value here. If your
service provider does not provide you with the value, you can safely
bypass this option.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the DNS (Domain Name System) servers to be used when a
DNS lookup is routed through this connection.
Selecting Obtain DNS server address automatically results in the DNS
servers being assigned by the WAN DHCP server to be used for outbound
DNS lookups over the connection. (The DNS servers are obtained along
with the WAN IP address assigned from the DHCP server.)
When Use the following DNS server address(es) is selected, you may
enter custom DNS server addresses for this WAN connection into the
DNS Server 1 and DNS Server 2 fields.
9.1.2 Static IP Connection
The static IP connection method is suitable if your ISP provides a static IP address to connect
directly.