User's Manual

https://www.peplink.com 46 Copyright @ 2019 Pepwave
connection. (The DNS servers are obtained along with the WAN IP address
assigned from the DHCP server.) When Use the following DNS server
address(es) is selected, you may enter custom DNS server addresses for
this WAN connection into the DNS Server 1 and DNS Server 2 fields.
9.1.4 L2TP Connection
L2TP has all the compatibility and convenience of PPTP with greater security. Combine this with
IPsec for a good balance between ease of use and security.
L2TP Settings
L2TP Username /
Password
Enter the required information in these fields in order to connect via L2TP to
your ISP.
The parameter values are determined by and can be obtained from your ISP.
Confirm L2TP
Password
Verify your password by entering it again in this field.
Server IP
Address / Host
L2TP server address is a parameter which is provided by your ISP.
Note: Leave this field blank unless it is provided by your ISP.
Address Type
Your ISP will also indicate whether the server IP address is Dynamic or Static.
Please click the appropriate value.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the