User's Manual

https://www.peplink.com 52 Copyright @ 2019 Pepwave
General Settings
Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection,
and will be used when none of the other higher priority connections are available.
Standby State
This option allows you to choose whether to remain connected or disconnected when
this WAN connection is no longer in the highest priority and has entered the standby
state. When Remain connected is chosen, bringing up this WAN connection to active
makes it immediately available for use.
Idle Disconnect
When Internet traffic is not detected within the user-specified timeframe, the modem
will automatically disconnect. Once the traffic is resumed by the LAN host, the
connection will be re-activated.
Health Check Settings
Health Check
Method
This setting allows you to specify the health check method for the cellular connection.
Available options are Disabled, Ping, DNS Lookup, HTTP, and SmartCheck. The
default method is DNS Lookup. See Section 10.4 for configuration details.
Timeout
If a health check test cannot be completed within the specified amount of time, the test
will be treated as failed.
Health Check
Interval
This is the time interval between each health check test.