User's Manual

https://www.peplink.com 68 Copyright @ 2019 Pepwave
Threshold
Maximum number
of clients
This setting determines the maximum number of clients that can connect to
this Wi-Fi frequency.
Advanced Wi-Fi AP settings can be displayed by clicking the on the top right-hand corner of
the Wi-Fi AP Settings section, which can be found at AP>Settings. Other models will display a
separate section called Wi-Fi AP Advanced Settings, which can be found at Advanced>Wi-Fi
Settings.
Advanced AP Settings
Management VLAN
ID
This field specifies the VLAN ID to tag to management traffic, such as
communication traffic between the AP and the AP Controller. The value is zero
by default, which means that no VLAN tagging will be applied.
NOTE: Change this value with caution as alterations may result in loss of
connection to the AP Controller.
Operating
Schedule
Choose from the schedules that you have defined in System>Schedule. Select
the schedule for the integrated AP to follow from the drop-down menu.
Beacon Rate
A
This option is for setting the transmit bit rate for sending a beacon. By default,
1Mbps is selected.
Beacon Interval
A
This option is for setting the time interval between each beacon. By default,
100ms is selected.