Specifications
C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
US. All US models are fixed to US channels only.
Channel Width
This option defines which channel width the radio will use:
20MHz - Supports clients with 20MHz capability.
This is the default value for 802.11ng.
40MHz - Supports clients with 20/40MHz capability.
20/40MHz - Supports clients with 20/40 MHz capability.
The radio will fall back to 20MHz if it detects APs that only support 20MHz. This is the
default value for 802.11na.
80MHz - Supports clients with 20/40/80MHz capability.
This is the default value for 802.11n/ac
Channel
This drop-down menu selects the 2.4 Ghz and 5GHz 802.11 channels to be used.
When Auto is selected, the system will perform channel scanning based on the
scheduled time set and choose the most suitable channel automatically.
Output Power
This option enables the configuration of transmission power.
Choose between :Max / High / Medium / Low
Max is the Maximum power supported for that country or Maximum power
supported for the device (whichever is the smaller value)
High is 3dBm below the max value.
Medium is 3dBm below high value
Low is 3 dBm below Medium value
Antenna Gain
This advanced feature becomes available when selecting this option in the Help
section( select the question mark) of the Output Power.
Beacon Rate
This drop-down menu provides the option to send beacons in different transmit bit
rates. The bit rates are 1 Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, and 11 Mbps.
Beacon Interval
Set the time between each beacon send. Available options are 100 ms, 250 ms, and
500 ms.
DTIM
Set the frequency for the beacon to include delivery traffic indication messages (DTIM).
The interval unit is measured in milliseconds.
RTS Threshold
Set the minimum packet size for your access point to send an RTS using the RTS/CTS
handshake. Setting 0 disables this feature.
Fragmentation
Threshold
Enter a value to limit the maximum frame size, which can improve performance.
Distance / Time
Convertor
This slider and text entry field can be used to interactively set slot time.
Slot Time
This field provides the option to modify the unit wait time before your access point