Specifications

C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
transmits. The default value is 9Njs.
ACK Timeout
Set the wait time to receive an acknowledgement packet before retransmitting. The
default value is 48Njs.
Frame
Aggregation
With this feature enabled, throughput will be increased by sending two or more data
frames in a single transmission.
Aggregation
Length
This field is only available when Frame Aggregation is enabled. It specifies the frame
length for frame aggregation. By default, it is set to 50000.
Max number of
Clients
Enter the maximum clients that can simultaneously connect to your access point or set
the value to 0 to allow unlimited clients.
Client Signal
Strength
Threshold
This field determines the minimum acceptable client signal strength, specified in
megawatts. If client signal strength does not meet this minimum, the client will not be
allowed to connect.
Advanced Features
Discover Nearby
Networks
Check this box to enable network discovery. Note that setting Channel to Auto will
activate this feature automatically.
Scanning Interval
This setting controls the interval, in seconds, that your access point scans for nearby
networks.