User's Manual

http://www.peplink.com 23 Copyright @ 2019 Pepxim
displayed
The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change
WAN connection priority and switch on/off the Wi-Fi AP. For further information on setting up
these connections, please refer to Sections 8 and 9.
Device Information displays details about the device, including model name, firmware
version, and uptime. For further information, please refer to Section 22.
Important Note
Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect only after clicking the Save button at
the bottom of each page. The Apply Changes button causes the changes to be saved and applied.
8 Configuring the LAN Interface(s)
8.1 Basic Settings
LAN interface settings are located at Network>LAN>Network Settings. Navigating to that