Instructions / Assembly

Sound of Rushing Air
At the front of the unit you
may hear the sound of
rushing air being moved
by the fan.
Gurgle/Hiss
“Gurgling” or “Hissing”
noise may be heard due to
refrigerant passing through
evaporator during normal
operation.
High Pitched Chatter
High efficiency compressors
may have high pitched chatter
during the cooling cycle.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
“pinging” or “switching” sounds.
NOTE: This illustration is for explanation
purposes only. The actual appearance of
the control panel on the air conditioner
purchased may be slightly different.
NORMAL SOUNDS
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize
yourself with the control panel as shown
to the right and all its functions. Then,
follow the symbol for the functions you desire.
The unit can be controlled by the unit
controls alone or with the remote control.
ELECTRONIC CONTROL
OPERATING INSTRUCTIONS
UNIT CONTROLS
5
Auto
Low
Med
High
Auto
Cool
Dry
Fan
TEMP/TIMER
On O
Sleep
Timer
Mode
Check
Filter
Energy
Saver
Fan
Follow
Me
Remote signal
receptor
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn the unit on or off.
NOTE: The unit will automatically initiate the Energy
Saver function under “Cool,” “Dry,” and “Auto” (only Auto-
Cooling and Auto-Fan) modes.
TO CHANGE TEMPERATURE SETTING:
Press
temperature setting.
UP/DOWN button to change the /
NOTE: Press or hold either UP (▲) or DOWN (▼) button
until the desired temperature is seen on the display. This
temperature will be automatically maintained anywhere
between 62°F (17°C) and 86°F (30°C). If you want the
display to read the actual room temperature, see “To
Operate on Fan Only” section on the next page.