Measurement Guide
How to Measure:
• Use a steel tape measure for more accuracy.
• Record width (Left to Right) first and then height (Top to Bottom) example, 20W x 64H
• For Inside Mounting: Deduct ½” from the overall width for mounting hardware and to allow the blinds/shade to
raise and lower freely.
• For Outside Mounting: The blind/shade covers more than just the window frame; add an overlap of 4” to the
width to overlap for additional privacy and light blocking .
• Contact customer service at 844 318 6168 or email at customerservices@allstrongusa.com for additional help.
!
!
How to Measure for an Inside Mount:
Depth:
• Find the product depth in “Product Specifications”, you need minimum of 1 ½”.
• Measure the depth from the wall to the window glass or metal frame and make sure there
are no obstructions.
Width:
• Measure inside the window frame across (left to right) in three parts (top, middle, bottom)
• Select the smallest width.
• Find the width size from the list and place order with exact width size needed.
Height:
• Measure inside the window frame top to bottom in three parts (left, middle, right).
• Select the longest length to make sure the blind or shade cover window opening completely.
• Select the length that match or exceeds your window length from the options available.
How to Measure for an Outside Mount:
• Measure molding or wall above the window first to make sure you have at least 1 1/2” of flat
space of molding or wall.
Width:
• Measure outside the window frame across in three parts (top, middle, bottom)
• Add 4” (or enough to overlap) to cover the over all area you want to be covered for additional
privacy and light blocking.
• Find the width size from the list and place order with exact width size needed.
Height:
• Measure outside the window frame top to bottom in three parts (left, middle, right) add 3
inches.
• Select the longest length to make sure the blind or shade cover window opening completely.
• Select the length that match or exceeds your window length from the options available.