Instructions / Assembly

Customer Service Hotline [phone]-PURE
Page 4
Home Master
®
RO Reverse Osmosis System Filter Change
to ensure a snug fit. Repeat step 5 for the other
end of the filter. Immediately discard used filter.
Repeat step 5 for each of the next replacement
filters.
6. Remount the Home Master RO, and SLOWLY open
the main water line to the Home Master RO. For
Home Master RO UV & ULTRA reconnect power
adapter. Then open the tank valve slowly. Failure to
repressurize slowly may result in system damage.
Water should now be flowing from the RO sink
spigot. Allow the water to run until the stream falls
to a thin gentle flow. Initial discharge may be
accompanied by a harmless discoloration due to
loose carbon.
7. Close the RO sink spigot, and allow 3 hours for the
reserve tank to refill. When system shuts off (goes
quiet), then check for leaks. Close feed valve and
open RO faucet and allow water to drain out until it
comes to a complete stop. Reopen feed valve and
allow system to refill. A second tank flushing may
be necessary depending on initial tank fill level.
System schematics available upon request.
www.ThePerfectWater.com or contact customer service
at 1-877-693-PURE. We will be happy to assist you with
your filter change.
Customer Service Hotline [phone]-PURE
Home Master
®
Series
Reverse Osmosis System
Filter Change Instructions
Perfect Water Technologies