User manual
19
GB
Playing a previously-paired Bluetooth source device
The DAB+MATE can memorize up to 2 sets of paired Bluetooth source devices, when the memory
exceed this amount, the earliest paring device will be over written from the device.
If your Bluetooth source device already paired with the DAB+MATE previously, the unit will
memorize your Bluetooth source device and it attempts to reconnect with a Bluetooth source device
in memory which is last connected. If the last connected Bluetooth source device is not available,
the DAB+MATE will try to connect to the second last Bluetooth source device.
Disconnecting your Bluetooth device
1. Press and hold the Bluetooth pairing button for 2-3 seconds to disconnect with your Bluetooth
device or turn off Bluetooth on your Bluetooth source device to disable the connection. There will
be a conrmation tone sound and the “Bluetooth Pairing” will show on the display. The Bluetooth
status indicator on the radio will ash a fast blue to show the radio is discoverable again for pairing.
2. You can also press the Source button to select any mode other than Bluetooth mode to disable
the connection.
Loudness On/Off
When the radio is switched on, press the Loudness On/Off button to get compensation on lower and
higher frequency. The effect will be more audible when the radio is in lower volume level. Display will
show “Loudness on” when Loudness function is applied.