Instructions

16
Language selection
By default your radio will display all menus and messages in English. You can choose your preferred
language.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the current mode.
3. Rotate the Tuning control knob to select “System Setting” and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select “Language” and press the Tuning control knob to enter the
language adjustment menu.
5. Rotate the Tuning control knob until your desired language appears on the display. Press the Tuning
control knob to conrm your choice. The display will change to the chosen language. The chosen
language will be marked with an asterisk.
Factory reset
If your radio fails to operate or some digits on the display are missing or incomplete, carry out the
following procedure.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the current mode.
3. Rotate the Tuning control knob to select “System Setting” and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select “Factory Reset” and press the Tuning control knob to enter
the setting.
5. Rotate the Tuning control knob to highlight “Yes” to proceed. If you do not wish to carry out a system
reset, highlight “No” and then press the Tuning control knob to conrm the setting.
6. With “Yes” highlighted, press the Tuning control knob. A full reset will be performed. All presets and
station lists will be erased. All settings will be set to their default values. After a system reset, the
radio will be restarted. The display will show “Welcome to Digital Radio” and a scan of the DAB
band III will be performed. In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal operation.