User manual
7
Display mode – DAB
Your radio has a range of display options when in DAB mode:
1. Press and release the Info button to cycle through the various modes.
a. Scrolling text (DLS) displays scrolling text messages such as artist/track name, phone in
number, etc.
b. Program type displays type of station being listened to e.g. Pop, Classic, News etc.
c. Multiplex name displays name of multiplex to which current station belongs.
d. Date displays the current date.
e. Channel & frequency displays current channel and frequency.
f . Bit rate/audio type displays the digital bit rate and the audio type for the currently tuned DAB
station.
g. Signal strength displays the signal strength of radio reception. The clear unlled rectangle
indicates minimum signal level required for satisfactory reception.
Finding new stations – DAB
As time passes new stations may become available. To nd new stations proceed as follows:
1. To carry out a full scan of the entire DAB Band III frequencies press and hold the Info/Menu button.
The display will show “Full scan”.
2. Press and release the Tuning control knob to conrm setting. As new stations are found, the station
counter on the right hand side of the display will increase and stations will be added to the list.
Manual Tuning – DAB
Manual tuning allows you to tune directly to the various DAB band III channels.
1. Press and hold the Info/Menu button for 2 seconds, display will show “Full scan”.
2. Rotate the Tuning control knob to nd “Manual Tune”. Press and release the Tuning control knob to
enter DAB channels in the list. Rotate the Tuning control knob to select required DAB channel. When
required DAB channel is found, press and release the Tuning control knob to select the required DAB
channel.
Dynamic Range Control (DRC) setting – DAB
DRC can make quieter sound easier to hear when your radio is used in a noisy environment.
1. In DAB band, press and hold the Info/Menu button for 2 seconds, display will show “Full scan”.
2. Rotate the Tuning control knob to nd “DRC Value”. Press and release the Tuning control knob to
enter adjustment mode.
3. Rotate the Tuning control knob to select required DRC setting (default is off).
DRC Off DRC is switched off, Broadcast DRC will be ignored.
DRC High DRC is set as sent by broadcaster.
DRC Low DRC level is set to 1/2 that sent by broadcaster.
4. Press and release the Tuning control knob to conrm the setting.
Note:
Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC,
then the DRC setting in the radio will have no effect.