User manual

MANUALLY SETTING CLOCK
The clock can only be manually set when the radio is in standby mode. If no buttons are
pressed for 5 seconds, the radio will exit the clock setup and the setting is cancelled.
1. Press and hold the Time Set knobfor12secondsuntilthehourdigitsashonthe
display.
2. Rotate the Time Set knob to set the hour.
3. Press the Time Set knobtoconrm,theminutedigitsash.
4. Rotate the Time Set knob to set the minute.
5. Press the Time Set knobtoconrm,thedayashesonthedisplay.
6. Rotate the Time Set knob to set the current day.
7. Press the Time Set knobtoconrm,themonthashes.
8. Rotate the Time Set knob to set the current month.
9. Press the Time Set knobtoconrm,theyearwillthenashonthedisplay.
10. Rotate the Time Set knob to set the current year.
11. Press the Time Set knobtoconrm,“SYNCLOCKON”ashes.
12. Rotary the Time Set knob to select “SYNCLOCK ON” or “SYNCLOCK OFF”.
13. Press the Time Set knobtoconrmandnishtheclocksetting.
RDS time synchronisation
If “SYNCLOCK ON” is selected, the symbol “
” will show on the clock display. Some
RDS stations transmit a time signal. If reception is good and you have selected the
“SYNCLOCK ON” option during the time setting, the time will be automatically updated
(“
”ashesonthedisplay).Timesynchronizationcantakeseveralminutes.The
automatic time setting is always activated when the radio is switched from standby to
FM broadcasting and receives a RDS station.
LOUDNESS
The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is on a lower volume level (Dynamic
Loudness).
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “Loudness”.
4. Rotate the Tuning knob to select between “Loudness On” or “Loudness Off”. Press
the Tuning knobtoconrmthesettingandreturntonormaldisplay.
TONE
The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
2. Press the Volume knob, the display shows “BASS 0”.
3. Rotate the Volume knob to set the desire Bass level.
4. Press the Volume knobtoconrm,thedisplayshows“TREBLE0”.
5. Rotate the Volume knob to set the desire Treble level.
6. Press the Volume knobtoconrmandreturntonormaldisplay,
ADDITIONAL METAL TELESCOPIC ANTENNA
You can use this as an alternative antenna for your radio in areas or locations where the
radiosignal(FM/DAB/DAB+)isweaktoveryweak.
ATTENTION: The standard antenna on the radio is exible. The metal antenna
is not exible or bendable and should be used with care. Breaking or bending
antennas is not covered by warranty.
Installing:Carefullyscrewoffthestandardexibleantenna.Firstcarefullyloosenthe
antennawithanopen-end-wrench(size14)–turncounterclockwise.
Carefully screw on the metal telescopic antenna and softly tighten it with an open-end
wrenchkey(size14)–turnclockwise.
ATTENTION: do not use too much force when xing the antennas as this can
damage the screw threat of the antennas or make it break off.
LANGUAGE SETTING
Themenuoftheradiocanbeconguredtovariouslanguages.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “Language”.
4. Press the Tuning knob to enter the language adjustment menu.
5. Rotate the Tuning knob until the desired language appears on the display (default
 isEnglish).
6. Press the Tuning knobtoconrmyourchoice.Thedisplaymenuwillchangetothe
chosen language.
17 18
GB
GB