User manual

Prune stations – DAB
If you move to a different part of the country, some of the stations that were listed
may no longer be available. Also, from time to time, some DAB services may stop
broadcasting, or may change location or frequency. The Prune stations function will
delete the unavailable DAB stations from your station list.
1. In DAB mode, press the Menu button.
2. Rotate the Tuning knob until the display shows “Prune”.
3. Press the Tuning knob to enter the setting.
4. Rotate the Tuning knobtoselectbetween“Yes”or“No”(defaultisNo).Select
“Yes” to enable this function if required, otherwise, select “No”.
5. Press the Tuning knobtoconrmyoursetting.Thedisplaywillreturntolastmenu
and press menu to go to the normal radio display.
Note: If you have moved the radio to a different part of the country, you should also carry
outasearchfornewstations(pleaseseethesection“Findingnewstations–DAB”).
FM MODE
Operating the radio – FM seek station
1. Press the On/Off button to turn on the radio.
2. Select the FM waveband by pressing the Source button.
3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.If
the radio has been used before, the last listened station will be played.
4. To seek station, press the Tuning knob.Thescanstopsautomaticallywhenitnds
 astationofsufcientstrength.
5. After a few seconds, the display will update and show station name if RDS
information is being received.
6. Tondthenextstation,presstheTuning knob again.
7. To seek stations in an opposite direction, rotate the Tuning knob clockwise (to scan
 fromlowfrequencytohighfrequency)orrotatecounterclockwise(toscanfrom
 highfrequencytolowfrequency),andpresstheTuning knob.
8. When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
Manual tuning – FM
1. Press the On/Off button to turn on the radio.
2. Select the FM band by pressing the Source button.
3. Rotate the Tuning knob to reach the preferred FM station. The radio will change
the frequency in steps of 50 kHz.
4. Rotate the rubber antenna to get the best reception. If the radio is tuned to a station
 ofsufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychange
to show the station name.
5. When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
RDS station service – FM
RDS(RadioDataSystem)isaninformationsystemwhichinaudibledigitalinformation
is transmitted in addition to the normal FM radio program. When the radio is receiving a
RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe
display. It may take some time before the RDS information is available.
Calling up RDS information
When you are listening to a FM station with RDS system, repeatedly press the Info
button to cycle through the information. This will only function if the reception level is
sufcientandclear.
a. Radiotext(RT) Displaysthemessageaboutthestationbeinglistenedtoas
ticker text.
b. Programtype(PTY) Displaysthetypeofstationbeinglistenedto,e.g.Pop,
Classic, News, etc.
c. Frequency Displays the frequency of the station being listened to.
d. Stereo or Mono Displays Stereo or Mono.
e. Signal level Displays the signal strength.
f. Time&date Displaysthecurrenttime(24hourclock)anddate.
11 12
GB
GB