Manual

The three controls on the right-hand side of the screen have special functions. You can
quickly access these by pressing the Info button and then using the Tuning/Seek/
Select control as needed:
select 'BKSP ' to erase a character just entered (long press to clear);
select 'OK ' when the complete key has been entered
select 'CANCEL ' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the display
will show 'Key: [Set]'. If you have previously entered a different key, you must clear this
by selecting the 'BKSP ' symbol.
After the nal character of the WEP or WPA key has been entered, highlight the 'OK'
symbol and press the Tuning/Seek/Select control. The screen will show 'Connecting...'
and then 'Setup wizard completed'. Press the Tuning/Seek/Select control to the exit
setup wizard. The sound system should now be able to connect to the network.
Once you have connected Perfectpro Rockpro to the network (and therefore also to the
Internet) it will display the Main menu. Press the Power button to put the sound
system into Standby/Off mode. It should then display the time as obtained from the
Internet. If the time display is not correct for any reason, it can easily be adjusted later,
'Manually setting the clock'.
15