Manual

Rotate the Tuning/Seek/Select control until 'Equaliser' is highlighted on the display.
Press the control.
Rotate the Tuning/Seek/Select control to cycle through and highlight the various
modes. Press the control to conrm your selection.
a - 'Normal (Flat)' d - 'Movie' g - 'News'
b - 'Jazz' e - 'Classic' h – 'My EQ'
c - 'Rock' f - 'Pop'
SETTING THE ALARM CLOCK
Prefectpro Rockpro has two separate alarms which can be set to wake you to either
the radio or a buzzer alarm. In the event of a power interruption Perfectpro Rockpro
has built in memory that will retain your alarm settings.
Important note: In Standby mode the alarm function can only be used when the radio
is operated on AC power. In Standby mode on battery power the radio will turn off fully
after 30 seconds (battery power save mode) and will not be turned on by the alarm
function/settings.
Ensure that the time is set correctly before setting the alarms.
With Perfectpro Rockpro switched on, press the Menu button to access the menu for
the current mode. Rotate the Tuning/Seek/Select control until 'Main menu' is
highlighted on the display. Press the control to enter the 'Main menu'.
Rotate the Tuning/Seek/Select control until 'Alarms' is selected on the display. Press
the control to see the current alarm settings. If no change is required, press the Menu
or Back buttons to exit.
31