Manual

Rotate the Tuning/Seek/Select control until the 'Volume:' option is highlighted on
the display and press the control if you wish to change it. The sound system uses
the saved volume setting for each alarm when it sounds. Rotate the control to set the
required volume and then press the control to conrm the setting.
In order to store the alarm settings rotate the Tuning/Seek/Select control until 'Save'
is highlighted. Press the control to store the alarm settings. Your radio will show 'Alarm
saved' and will then go back to the list of alarms with the new alarm setting shown in
the display. If you decide not to save the settings, press the Back button. The display
will show 'Save changes' with a 'YES' or 'NO' option. Rotate the Tuning/Seek/Select
control to choose 'NO' and then press the control. 'Alarm not saved' will show on
the display. Active alarms are shown using small alarm indicators at the bottom of the
playing displays and on the clock display when in standby.
GB
34