User manual

17
BACKLIGHT
LCD backlight conguration
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “LCD
backlight”.
4. Press the Tuning knob to enter the LCD backlight adjustment menu.
5. Rotate the Tuning knob to select “on” in order to keep backlight always lightened
when the radio is turned on with AC power supply;
6. Or rotate the Tuning knob to select “off” (by default) so that the backlight will be
lightened for about 10 seconds whenever a button is pressed with AC power supply.
7. Press the Tuning knobtoconrmyourchoice.
Note: The LCD backlight option “on” is only functional when the radio is powered
by AC power supply. When the radio is powered by battery power supply, the
LCD backlight is switched to option “off” – 10 seconds lightened when a button is
pressed. When the radio is connected to mains AC power again, the last user
setting will be applied again.
18
RADIO NAME OPTION
This radio supports customization of the radio’s name. If the radio has been named, the
name of the radio will be shown when the radio is turned on and when the radio is turned off.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “Name”.
Press the Tuning knob.
4. Rotate the Tuning knob to select the letters. The maximum length of new name is
16 letters long.
5. Press the Tuning knobtoconrmthecurrentselection.BypressingthisTuning
knob, the cursor will be moved to next position for selection.
6. Press the P3 or P4 button to move the cursor to left or right.
7. Repeat step 4 to step 6 to edit the new radio name.
8. To complete editing the new radio name, you can either edit all the 16 letters or
press the Menu button.
9. Whennishingeditingtheradioname,theLCDwilldisplay“Conrmchanges”
 intherstline,anddisplay“OK”tosavethechangesor“Cancel”todiscardthe
changes.
10. Toconrmthechanges,rotatetheTuning knob until “OK”, and then press the
Tuning knob to exit. After this action, the radio will save the new name.
11. To cancel the changes, rotate the Tuning knob until “Cancel”, and then press the
Tuning knob to exit. After this action, the radio will discard the changes and keep
the current radio name as for display.
12. Whennexttimetheradioisturnedon,theLCDwillshow“Welcome”intherstline
and the new name in the second line.
13. Whentheradioisturnedoff,theLCDwillshow“Goodbye”intherstlineandthe
new name in the second line.
Notes:
- In the name menu, when there is no operation of the panel buttons for more than 20
seconds during editing, the radio will automatically exit the name function without
saving any of the changes.
- The default radio name is empty. The new edited name will be lost and go back to
default (no name) after executing a factory reset in the menu.
- The radio supports maximum 16 letters as the name of the radio.
GB