Instructions

Prune stations – DAB
If you move to a different part of the country, some of the stations that were listed
may no longer be available. Also, from time to time, some DAB services may stop
broadcasting, or may change location or frequency. The Prune stations function will
delete the unavailable DAB stations from your station list.
1. In DAB mode, press the
Menu button
.
2. Rotate the
Tuning knob
until the display shows “Prune”.
3. Press the
Tuning knob
to enter the setting.
4. Rotate the
Tuning knob
toselectbetween“Yes”or“No”(defaultisNo).Select
“Yes” to enable this function if required, otherwise, select “No”.
5. Press the
Tuning knob
toconrmyoursetting.Thedisplaywillreturntolastmenu
and press menu to go to the normal radio display.
Note: If you have moved the radio to a different part of the country, you should also carry
outasearchfornewstations(pleaseseethesection“Findingnewstations–DAB”).
FM MODE
Operating the radio – FM seek station
1. Press the
On/Off button
to turn on the radio.
2. Select the FM waveband by pressing the
Source button
.
3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.If
the radio has been used before, the last listened station will be played.
4. To seek station, press the
Tuning knob
.Thescanstopsautomaticallywhenitnds
 astationofsufcientstrength.
5. After a few seconds, the display will update and show station name if RDS
information is being received.
6. Tondthenextstation,pressthe
Tuning knob
again.
7. To seek stations in an opposite direction, rotate the
Tuning knob
clockwise (to scan
 fromlowfrequencytohighfrequency)orrotatecounterclockwise(toscanfrom
 highfrequencytolowfrequency),andpressthe
Tuning knob
.
8. When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
Manual tuning – FM
1. Press the
On/Off button
to turn on the radio.
2. Select the FM band by pressing the
Source button
.
3. Rotate the
Tuning knob
to reach the preferred FM station. The radio will change
the frequency in steps of 50 kHz.
4. Rotate the rubber antenna to get the best reception. If the radio is tuned to a station
 ofsufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychange
to show the station name.
5. When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
RDS station service – FM
RDS(RadioDataSystem)isaninformationsystemwhichinaudibledigitalinformation
is transmitted in addition to the normal FM radio program. When the radio is receiving a
RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe
display. It may take some time before the RDS information is available.
Calling up RDS information
When you are listening to a FM station with RDS system, repeatedly press the
Info
button
to cycle through the information. This will only function if the reception level is
sufcientandclear.
a. Radiotext(RT) Displaysthemessageaboutthestationbeinglistenedtoas
ticker text.
b. Programtype(PTY) Displaysthetypeofstationbeinglistenedto,e.g.Pop,
Classic, News, etc.
c. Frequency Displays the frequency of the station being listened to.
d. Signal level Displays the signal strength.
e. Time&date Displaysthecurrenttime(24hourclock)anddate.
11 12
GB
GB