User's Manual

AFTERGLOW WII REMOTE USER MANUAL
Congratulations on your purchase of the AFTERGLOW Remote for Wii™.
The contents of this package include:
1 – Remote for Wii™
1 – User Manual
Before using this product, please attach the wrist strap to the end of the Remote.
Battery Instructions:
Open the battery compartment located on the back of the Remote
Insert the 2 AA batteries, ensuring correct polarity (see figure 2)
Close the Remote battery compartment (see figure 3)
Synchronization:
Press the “POWER” button on the top left hand side of the Remote to switch it on
Synchronize the Remote with the Wii™ console
o Press the “SYNC” button located on the Wii™ console (see figure 4)
o Press the “SYNC” button located on the Remote (see figure 5)
Standby Mode:
The Remote will automatically enter standby mode when not in use for a period of time.
To exit standby mode, press any button on the Remote.
Troubleshooting Tips:
Remote not working:
Change the batteries in the Remote
Remote may be in standby mode (refer to Standby Mode Instructions)
Ensure the Remote is properly synchronized with the Wii™ console
Refer to the Wii™ console Instruction Manual for more troubleshooting tips
WARNING:
We recommend taking fifteen-minute breaks for every hour played. If, at any time, you feel joint pain in

Summary of content (3 pages)