User Manual

MICRO-ADJUSTING
TORQUE WRENCH
PERDIGUERO FLEXIBLE
OPERATING INSTRUCTIONS
1. Study this booklet carefully before operating
this wrench
2. Never apply more torque than the maximum
scale reading.
3. This torque wrench is designed for manual
tightening of threaded fastners only. DO NOT
USE IT AS A NUT-BREAKER OR FOR ANY
OTHER PURPOSE.
4. Always use approved eye protection when
using tools.
5. This wrench will not prevent you from applying
more torque than set. It is not a torque limiting
tool. Learn how different amounts of torque
“feel” so you will reduce the possibility of
damage and/or injury due to accidental
overtorquing.
6. There are no user-serviceable components
inside the wrench. Disassembling the wrench
or making any adjustments will result in the
loss of accuracy.
7. This is a precision measuring instrument.
Calibration and servicing must be done
regularly and is the owner’s responsibility.
CARE AND MAINTENANCE
1. A torque wrench is a precision instrument and should be
handled and stored with care. Do not throw it around, hammer
with it, or use it as a pry bar
2. The wrench is lubricated for life and should not be oiled. The
only exception is the ratchet head which may be lubricated as
needed for smooth operation
3. The plastic grip is not affected by petroleum products but may
be damaged by some industrial solvents. Clean with a clean
cloth soaked in mineral spirits or denatured alcohol. NEVER
IMMERSE THE WRENCH OR ANY PORTION OF IT IN ANY LIQUID!
4. This is a precision measuring instrument. Calibration and
servicing must be done regularly and is the owner’s RESPONSIBILITY.
CERTIFICATION
This torque wrench is certified to have been calibrated prior to shipment to
the accuracy off ±4%in the right hand direction, and ± 6% in the left hand
direction on readings 20% to 100% of capacity. On readings below 20% of
capacity, the accuracy is ± two minor scale increments.