OPERATOR’S MANUAL FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference.
! !" SECTION Page Table of Contents…………………………………………………………………………..….…… Safety Instructions and Warnings………………………………………………………..………. Double Insulation Instructions....………………………………………………………….……… Extension Cord…………………………………………………………………………….………. Unpacking and Checking Carton Contents………….……………………..………….…….….. General Assembly Instructions…………………………………………………………….….….. Wet & Dry Vacuum Operation…………………………………………………………………….. Blowing Operation……………………………………………………………………………….….
" #$ !" %& $ !"' %!$ !(" Read and understand all instructions before using this vacuum Read and understand this owner’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this Wet/Dry Vac only as described in this manual. To reduce the risk of personal injury or damage to your TM Wet/Dry Vac, use only Performax recommended accessories. FOR FUTURE REFERENCE.
& $ !"& $ !$ !" %& $ !" This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac. DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
&!* +$ !( ! , +$ !( % ! ! !" Remove entire contents of carton. Check each item against the carton contents list. Carton contents lists Key A B C D E F G H I J K L M N O P Q R Description………………... QTY Vac Assembly…………....... Hose Holding Rod ……….. Mounting Rack ……………. 11-Foot Hose………………. 10-Foot Flex Hose………… Floor / Squeegee Nozzle…. Crevice Tool ………………. Round Dusting Brush …….. Extension Wands ……........ Car Nozzle ………………… Cartridge Filter…………….. Filter Retainer……………… Air/Noise Diffuser ………...
(!% "" #$ !" %& $ !" WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC. UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Undo the latches. (fig. 2) 3. Lift the power head off of the container. (fig. 3) 4. Remove the contents from inside the container, make sure you have all contents as listed on page 5. (fig. 4) 5.
MOUNTING THE VACUUM ON TO THE RACK 1. Measure the distance from the top screw hole of the mounting rack to the closest electrical outlet and add 12 inches. This is the amount of cord needed; wind the excess power cord around the cord wrap area located on the rear of the vacuum. (fig. 8) nto part A on the back of the container. (fig.9) 2. Make sure the cord is not 3.
' %# && *% $! DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE, ALCOHOL OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO; COAL, MAGNESIUM, GRAIN OR GUN POWDER.
$ !( * % $! This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER. WARNING: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS. WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. 1. 2. 3. 4. 5. 6. 7. 8. Verify that the power cord is disconnected from the outlet. (fig. 1) Make sure the container is empty before using as a blower.
IMPORTANT! Clean or change the cartridge filter regularly for best performance. ALWAYS USE CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used with out the cartridge filter, the motor will burn out and the warranty will be voided. Always keep spare filters on-hand. NOTICE! The filter included is made of high quality materials designed to stop small dust particles. The cartridge filter is capable for both wet and dry use A DRY CARTRIDGE FILTER IS NECESSARY TO PICK UP DUST.
%" $ !( , % !% Resetting The Remote Control 1. Set the power switch to remote control position “ ”. (fig. 1) 2. Press the RESET button on the side of the power head with a pen tip until the indicator lights up. (fig. 2) 3. Within the 15 seconds, press and hold the “ON” or “OFF” button on the remote control. If you didn’t press and hold the “ON” or “OFF” button within the 15 seconds, it will cancel this resetting. (fig. 3) 4. When the light blinks 3 times, this means the remote control is programmed.
% & ", $ !( WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE TROUBLESHOOTING Symptom Vacuum will not operate. Possible Causes 1) No power supply. 2) Faulty power cord. 3) Container full. 4) Switch in the wrong position Dust comes out from motor cover. Reduced efficiency and motor/speed vibration. Remote will not operate. 1) The cartridge filter is missing or damaged. 1) There is a blockage in the nozzle, hose, or the container inlet. The cartridge filter is clogged by fine dust.
)* $ ! *%" $ " - 13 -
WARRANTY TM PERFORMAX WET/DRY VACUUM WARRANTY 30-DAY MONEY BACK GUARANTEE: TM This Performax wet/dry vacuum carries our 30-Day Money Back Guarantee. If you are not completely TM satisfied with your Performax brand power tool for any reason within thirty (30) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
