Use And Care Manual
Page 9
SPECIFICATIONS
Rated Voltage 120 V~ 60 Hz
Rated Power Input 13 A
No load Speed 5500 RPM
Blade Diameter 7-1/4" (185mm)
Blade arbor 5/8" (16mm)
Cutting Depth at 90° 2-1/2" (63.5mm)
Cutting Depth at 45° 1-13/16" (46mm)
Bevel Angle Adjustable 0-45°
Tool Weight 8 lbs. (3.63 kg)
ASSEMBLY
WARNING:
If any part is broken
or missing, DO NOT attempt to plug in the
power cord or operate the tool until the
broken or missing part is replaced. Failure
to do so could result in serious injury.
WARNING:
Do not attempt to
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modication is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING:
Your tool should
never be connected to the power source
when you are assembling parts, making
adjustments, installing or removing
blades, cleaning, or when it is not in
use. Disconnecting the tool will prevent
accidental starting, which could cause
serious personal injury.
CONTENTS
Circular saw, blade wrench, blade, edge
guide and instruction manual.
UNPACKING
1. Carefully remove the tool and any
accessories from the carton. Make sure
that all items listed in the packing list are
included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.