Use And Care Manual

Page 4
WARNING:
Safety symbols in
this Instruction Manual are used to flag
possible dangers. The safety symbols
and their explanations require your full
understanding. The safety warnings do not,
by themselves, eliminate any danger, nor
are they substitutes for proper accident
prevention measures.
WARNING:
This Safety Alert
Symbol indicates caution, warning, or
danger. Failure to obey a safety warning
can result in serious injury to yourself or
others. To reduce the risk of injury, fire,
or electric shock, always follow the safety
precautions.
KNOW YOUR TOOL
To operate this tool, carefully read this
Instruction Manual and all labels affixed
to the miter saw before using. Keep this
instruction manual available for future
reference.
READ ALL INSTRUCTIONS
THOROUGHLY.
SAVE THESE INSTRUCTIONS.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING:
Read all safety
warnings, instructions, illustrations and
specications provided with this power tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in
explosive atmospheres, such as in the
presence of ammable liquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
• Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
SAFETY INSTRUCTIONS