Use And Care Manual

Operation
1
Removing the sliding tray
2
Sliding tray height adjustment
Fully extend the empty sliding tray.
□
□
elihw revel esaeler eno eht pu hsuP pulling
down on the other release lever.
□ Pull the tray outward until it is released from the
tray slide.
With the sliding tray removed, push up at the front
of the outer slide to release the clip from the side
panel groove and then pull outward to remove.
□
□ Insert the back clip of the outer slide, and then push
down to lock the front clip into the groove of the
side panel.
□ Determine the desired height of your shelf.
3
Re-inserting the sliding tray
Extend the tray slides.
□
□
Insert the brackets on each side of the tray into
the slots in the slides, being careful that they are
properly positioned.
□ Once properly inserted, completely close the tray
to set the slides in their proper positions.
6