53" x 18" 6-Drawer Tool Chest and 53" x 18" 9-Drawer Tool Cabinet SKU# 245-2174/245-2175 To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols.......................................................................... 3 Safety Instructions...................................................................... 4 Parts List.................................................................................... 5 Assembly.................................................................................... 6 Operation.................................................................................... 7 Maintenance and Safety.
SAFETY SYMBOLS Model #:________________________________ CAUTION: 1. Read and follow all safety and assembly instructions before using this product for the first time. 2. Fill in the following information and retain the manual for future reference: Place of purchase:_______________________ Date of purchase:________________________ Receipt # of purchase:___________________ Do not open more than one drawer at a time. Do not step on drawers. Do not allow children near the unit.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
PARTS LIST For service regarding parts, assembly or warranty information, please call: 1-800-459-4409. The keys are taped to bottom left drawer of the chest. The keys are taped to the top of the caster carton, which is placed in the bottom drawer of the cabinet. 7 5 4 9 1 1 2 5 6 10 11 3 2 3 7 8 4 6 8 Ref# Description Part# Qty Ref# Description Part# Qty 1 Gas Strut 4.1001.1 2 pcs 1 Cabinet Handle 7.1000.1 1 pc 2 Chest Handle 6.1000.1 2 pcs 2 M6 x 16 Hex Bolt 10.1002.
ASSEMBLY NECESSARY TOOLS REQUIRED FOR ASSEMBLY • 10 mm socket • 14 mm socket • Extension ratchet INSTALL THE HANDLE Position the cabinet handle over the holes and attach with the M6 x 16 hex bolts. Tighten securely using a 10 mm socket. INSTALL THE CASTERS NOTE: Two or more people may be required to complete this step. Carefully lay the bottom cabinet on its back using a soft mat under the back for protection.
OPERATION TO REMOVE DRAWERS Pull the drawer out so it is almost fully extended. PUSH UP on the black release lever on one side, while PULLING DOWN on the black release lever on the other side. While holding the levers in the positions as instructed above, pull the drawer outward until it is released from the drawer slide. PUSH UP (ONE SIDE) TO REPLACE DRAWERS Extend the drawer slides from the tool chest or cabinet.
MAINTENANCE AND SAFETY MAINTENANCE Lubricate the casters with high quality bearing grease once a year. Lubricate the slides twice a year with a product like WD40 or other quality lubricant. This is especially important when the temperature decreases, as the bearing can become stiff. Periodically clean the drawer fronts, drawer trim, and other surfaces with mild detergent and water. Auto wax will preserve the storage unit’s luster finish. Apply the wax as you would to a car.
MAINTENANCE AND SAFETY WARNING: DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage. WARNING: DO NOT alter this product in any manner. For example, do not weld external lockbars or attach electrical equipment. This may cause product damage or personal injury. CAUTION: Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an uneven surface, which may cause personal injury or product damage.
NOTES Page 10
53" Tool Chest & Cabinet LIMITED 5 YEAR WARRANTY PERFORMAX® Tool Cabinets and Chests have been manufactured to the highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for 5 years. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion.
©2020 Menard, Inc.
